What to do if HP J9147A cables are faulty or loose?
If you're experiencing issues with your HP Switch, start by checking the cables. Ensure they are firmly connected at both ends. If the connections seem fine, try swapping the cable with a different one to rule out a faulty cable.
What to do if HP Switch uses non-standard cables?
Non-standard or miswired cables can lead to network issues with your HP Switch. Replace the existing cable with a correctly wired one. You can also compare your cable to the cable in appendix B, 'Cables and Connectors' for pinouts and correct cable wiring.
General| Model | HP J9147A |
|---|---|
| Category | Switch |
| Product Type | Ethernet Switch |
| Data Rate | 10/100/1000 Mbps |
| Switching capacity | 48 Gbps |
| Forwarding rate | 35.7 Mpps |
| Jumbo Frame Support | Yes |
| Power Supply | Internal |
| Form Factor | Rack-mountable |
| Layer | Layer 2 |
| VLAN Support | Yes |
| Ports | 24 |
| Management | CLI |
Describes the physical components of the switch's front panel, including ports and LEDs.
Details the different types of network ports available on the switch and their features.
Explains the function and meaning of various LEDs on the switch for status indication.
Describes the physical components located on the rear of the switch.
Outlines the main features and capabilities of the 2910al switches.
Lists the components included in the switch package.
Provides essential safety and installation guidelines before setup.
Outlines the step-by-step process for installing the switch.
Details methods for physically mounting the switch in various locations.
Explains how to connect the switch to a power source for operation.
Guide for connecting network cables to the switch ports.
Essential steps for initial switch configuration.
How to use the console setup screen for basic configuration.
Managing the switch remotely using its IP address.
Initial steps and common solutions for troubleshooting issues.
Interpreting LED patterns to diagnose problems.
Tests to diagnose hardware-related issues with the switch.
Instructions for resetting the switch to its factory default settings.
Physical dimensions and weight of the switches.
Electrical specifications like voltage and current ratings.
Operating and non-operating environmental conditions.
Safety standards the product complies with.
Physical dimensions and weight of the expansion modules.
Operating and non-operating environmental conditions for modules.
Optical power specifications for transceivers and modules.
Specifications for various types of network cables used with the switch.
Supported network technologies and their maximum distances.
Pin assignments and wiring rules for twisted-pair cables.
General safety precautions and warnings for product use.
EMC compliance statements for various regions.
Declaration of Conformity for the European Community.
Information regarding the disposal of waste electrical and electronic equipment.
To Next Page
