HP Jetdirect 610N - Page 141

EN HP Jetdirect Configuration Page 141
➎
Novell NetWare Parameters
Information in this section of the Jetdirect configuration page is
described in Table 8.5
. For error messages, see Table 8.9.
Table 8.5
➎
Novell NetWare Configuration Information (1 of 2)
Message Description
STATUS: Indicates the current Novell NetWare configuration status.
READY: Indicates the HP Jetdirect print server is awaiting
data.
DISABLED: Indicates that IPX/SPX was manually
disabled.
INITIALIZING: Indicates that the print server is registering
the node address or name. An additional status message
may also be displayed.
An Error Code and Message is displayed if the print server
is not ready. For more information, see Table 8.9
.
NODE NAME: Queue Server Mode: The print server name. This name
must match a valid print server on the appropriate NetWare
file server. The default name is NPIXXXXXX, where
XXXXXX is the last six digits of the LAN hardware (MAC)
address.
Remote Printer Mode: The name you gave the network
printer when you configured the network printer. The
default name is NPIXXXXXX.
NETWARE MODE: The mode used by the HP Jetdirect print server.
QUEUE SERVER indicates that the print server receives
data directly from the queue.
REMOTE PRINTER, with the printer number following it,
indicates that the print server emulates a Novell NetWare
remote printer.
If the printer is not configured, this field displays QUEUE
SERVER.
NDS TREE NAME: Displays the name of the Novell Directory Services (NDS)
tree for this printer. NDS is a database of objects on a
NetWare network organized in a hierarchical tree structure.
NOT SPECIFIED or blank: NDS is disabled.
NDS CONTEXT: Displays the fully qualified NDS name where the
HP Jetdirect print server object resides in the NDS tree.
For example:
CN=lj_pserver.OU=support.OU=mycity.OU=mycompany
NOT SPECIFIED or blank: NDS is disabled.