142 HP Jetdirect Configuration Page EN
ATTACHED SERVER: The Attached Server field identifies the Jetdirect discovery
method [NSQ] (Nearest Service Query) or [GSQ] (General
Service Query) and the name of the proxy file server used
to locate the configured bindery servers.
NOT SPECIFIED or blank: A NetWare server has not been
configured.
QUEUE POLL
INTERVAL
(Job Poll Interval) Specifies the time interval (seconds) that
the HP Jetdirect print server waits to check for print jobs in
a print queue. The default is 2 seconds.
SAP INTERVAL: Specifies the time interval (seconds) that the HP Jetdirect
print server waits between Service Advertising Protocol
(SAP) broadcasts on the network. The default is 60
seconds.
SERVER x: Identifies a NetWare file server to which the HP Jetdirect
print server is attached.
Table 8.5
➎
Novell NetWare Configuration Information (2 of 2)
Message Description
To Next Page
Loading...
