174 Using the Embedded Web Server EN
System Contact A text string (stored on the HP Jetdirect print server) for the
name of a person to contact for this device. See TCP/IP on
the [Networking] Tab
.
System Location A text string (stored on the HP Jetdirect print server) that
identifies the physical location of this device. See the
Networking TCP/IP configuration pages.
HP Jetdirect The product number of the HP Jetdirect print server (for
example HP J4169A).
Firmware Version The version of the operating instructions installed on the
HP Jetdirect print server.
IP Address The Internet Protocol address configured on the
HP Jetdirect print server. For general information on IP
addresses, see Appendix A
.
Hardware Address The LAN hardware (or MAC, Media Access Control)
address of the HP Jetdirect print server. This unique
address is assigned by Hewlett-Packard.
Admin Password Specifies whether or not an administrative password has
been set. This password may also be configured through
a Telnet session with the HP Jetdirect print server.
Use the “Admin Password” page to set or clear
administrative passwords. If an administrative password
has been set, you will be prompted for a User Name and
Password to access network parameters. For more
information, click Help, or see the Admin Password
section
in this guide.
Table B.1 HP Jetdirect Home Page Items (2 of 2)
Item Description
To Next Page
Loading...
