46 TCP/IP Configuration EN
Table 3.3 TFTP Configuration File Parameters (1 of 8)
General
passwd:
A password (up to 16 alphanumeric characters) that allows administrators to
control changes of HP Jetdirect print server configuration parameters through
Telnet or embedded web server.
sys-location:
Identifies the physical location of the printer (SNMP sysLocation object). Only
printable ASCII characters are allowed. The maximum length is 64 characters. The
default location is undefined. (Example: 1st floor, south wall)
sys-contact:
ASCII character string (up to 64 characters) that identifies the person who
administers or services the printer (SNMP sysContact object). This may include
how to contact this person. The default contact is undefined.
TCP/IP Main
host-name:
Specifies the node name that will appear on the Jetdirect configuration page.
Default is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware
address.
domain-name:
The domain name for the device (for example, support.hp.com). It does not
include the host name--it is not the Fully Qualified Domain Name (such as
printer1.support.hp.com).
dns-svr:
IP address of the DNS (Domain Name System) server.
pri-wins-svr:
The IP address of the primary Windows Internet Name Service (WINS) server.
sec-wins-svr:
The IP address of the secondary Windows Internet Name Service (WINS) server.
smtp-svr:
The IP address of the outgoing e-mail Simple Mail Transport Protocol (SMTP)
server, for use with supported Scan devices.
TCP/IP Print Options
9100-printing:
Enables or disables printing to TCP port 9100 on the print server. 0 disables,
1 (default) enables.
ftp-printing:
Enables or disables the ability to print via FTP: 0 disables, 1 (default) enables.
To Next Page
Loading...
