3. Lift the printhead latch.
4. Lift the handle of a printhead and use it to pull the printhead out of its slot.
5. Place the printheads in an airtight plastic container so they will not dry out, and put them
aside. Do not send them with the device unless the HP customer support call agent instructs
you to.
6. Close the cover.
7. Press the Power button to turn off the device.
Pack the device
Complete the following steps after you have prepared the device for shipment.
To pack the device
1. If available, pack the device for shipment by using the original packaging materials, or use
the packaging materials that came with your replacement device.
Pack the device
87
To Next Page
Loading...