4. Select the Font DIMM check box.
5. In the Configure Font DIMMs dialog box, click Add to add the font file.
6. In the Add Font DIMM dialog box, browse to the location of the font file, select the font
file, and then click OK.
7. In the Configure Font DIMMs dialog box, select the installed DIMM.
8. Click OK.
Enabling the language font DIMM (HP Color LaserJet 5500
models)
If you installed a language font DIMM in the printer, you must select the Font DIMM option in
the printer driver for the font DIMM to work properly. To enable fonts from the PCL 5c and
PCL 6 printer drivers for Windows, follow this procedure:
1. On the Start menu, point to Settings, and click Printers.
2. Select this printer and select Properties.
3. On the Configure tab, click More.
4. Select the Font DIMM check box.
5. In the Configure Font DIMMs dialog box, click Add to add the font file.
6. In the Add Font DIMM dialog box, browse to the location of the font file, select the font
file, and click OK.
7. In the Configure Font DIMMs dialog box, select the installed DIMM.
8. Click OK.
Checking DIMM installation (HP Color LaserJet 5500 models)
Check that the DIMMs are installed correctly and working.
1. Turn the printer on. Check that the Ready light is on after the printer has gone through
the startup sequence. If an error message appears, a DIMM may have been incorrectly
installed.
2. Print a configuration page.
3. Check the Installed Personalities and Options section on the configuration page and
compare it with the configuration page printed before the DIMM installation.
4. If the amount of recognized memory has not increased:
The DIMM may not be installed correctly. Repeat the installation procedure.
The DIMM may be defective. Try a new DIMM.
Installing an HP Jetdirect print server card
You can install an HP Jetdirect print server card in the base model printer, which comes with
three available EIO slot.
ENWW Printer memory (HP Color LaserJet 5500 models) 123
To Next Page
Loading...