6. Remove the paper pickup drive unit.
Figure 6-20.
Removing and replacing the paper pickup drive unit (1 of 2)
Note
Callouts 1 and 2 are shown in the side view.
Figure 6-21.
Removing and replacing the paper pickup drive unit (2 of 2)
Lifter drive unit
Use the following steps to remove the lifter drive unit.
To remove the lifter drive unit
1. Remove the paper pickup unit. See Paper pickup unit.
2. Remove the spring shown in callout 1.
202 Chapter 6 Removal and replacement ENWW
To Next Page
Loading...