HP Laser Jet 5550 - Page 289

Alphabetical printer messages
Note
Many of the procedures in this section instruct you to replace the DC controller PCB, the
ETB, the formatter, the drum drive motors, the drum drive gears, or a laser/scanner unit.
After replacing one of these items, you must access the Print Quality menu and select
CALIBRATE NOW to ensure proper print quality after the repair. See
Calibrate now, for
instructions on calibrating the printer. When the ETB or the fuser are replaced before their
normal end of life, access the resets menu and reset the counter to zero.
Table 7-2. Alphabetical printer messages (HP Color LaserJet 5500 models)
Control panel message Event
log error
message
Description Recommended action
If no paper in tray:
MANUALLY FEED
<TYPE> <SIZE>
For help press
alternates with
MANUALLY FEED
<TYPE> <SIZE>
To use another
tray press
None A job sent requires a specific
paper type and size that is not
currently available.
1.
Press
for detailed
information.
2. Press
and to step
through instructions.
Access Denied
MENUS LOCKED
None An attempt has been made to
modify a menu item while the
control panel security mechanism
is enabled by the printer
administrator. The message will
disappear shortly, and the printer
will return to Ready state.
Contact the printer administrator
to change settings.
CHOSEN PERSONALITY NOT
AVAILABLE
For help press
alternates with
CHOSEN PERSONALITY NOT
AVAILABLE
To continue press
None PJL encountered a request for a
personality that did not exist in the
printer. The job is aborted and no
pages will be printed.
1.
Press
for detailed
information.
2. Press
and to step
through the instructions.
CLOSE FRONT COVERS
For help press
None The covers need to be closed. 1.
Press
for more information.
2. Close front covers.
Note
This message might also appear if
the fuser is missing or incorrectly
installed. Ensure that the fuser is
correctly installed.
ENWW Alphabetical printer messages 267