HP Laser Jet 5550 - Page 323

Control panel message Event
log error
message
Description Recommended action
22 SERIAL I/O
BUFFER OVERFLOW
To continue press
None The printer’s serial buffer has
overflowed during a busy state.
Press to resume printing.
Note
A loss of data will occur.
40 BAD SERIAL
TRANSMISSION
To continue press
None A serial data error (parity, framing,
or line overrun) has occurred while
the printer was receiving data.
Press to resume printing.
Note
A loss of data will occur.
40 EIO X BAD
TRANSMISSION
To continue press
None A connection with the card in EIO
slot X has been abnormally broken.
1. Press to resume printing.
Note
A loss of data will occur.
2. Check that all cables are
connected to the EIO ports
and that the EIO board is
seated properly.
3. If possible, print to another
network printer to verify the
network is working properly.
41.3 UNEXPECTED
SIZE IN TRAY X
For help press
alternates with
LOAD TRAY X
<TYPE> <SIZE>
For help press
None Media is loaded which is longer or
shorter in the feed direction than
the size configured for the tray.
1. If the incorrect size was
selected, cancel the job or
press
to access help.
2. Press
and to step
through the instructions.
41.5 UNEXPECTED
TYPE IN TRAY X
For help press
alternates with
LOAD TRAY X;
<TYPE> <SIZE>;
For help press
None The printer senses a different
media type in the media path than
configured in the tray.
1. If the incorrect type was
selected, cancel the job or
press
to access help.
2. Press
and to step
through the instructions.
Table 7-4. Numerical printer messages (HP Color LaserJet 5500 models) (continued)
ENWW Numerical printer messages 301