Menu item Values Description
OPTIMIZE REDUCE (HP Color LaserJet
5550 models only)
REDUCE BACKGROUND
(HP Color LaserJet 5500
models only)
BACKGROUND (HP Color
LaserJet 5550 models only)
TRANSFER
TRANSPARENCY (HP Color
LaserJet 5550 models only)
FUSER WARM UP (HP Color
LaserJet 5550 models only)
MEDIA TYPE (HP Color
LaserJet 5550 models only)
TRAY 1 (HP Color LaserJet
5550 models only)
RESTORE OPTIMIZE
Allows you to optimize certain
parameters for all jobs rather
than optimizing by media type.
CALIBRATE NOW (HP Color
LaserJet 5500 models only)
Executes all printer
calibrations: DMAX, DHALF,
color plane registration, and
drum phase adjustment
QUICK CALIBRATE NOW
(HP Color LaserJet 5550
models only)
Use this item to perform a
partial printer calibration (D-
Max and D-Half) used for color
tone correction.
FULL CALIBRATE NOW
(HP Color LaserJet 5550
models only)
Use this item to perform a full
printer calibration, which
includes D-Max, D-Half, drum
phase calibration, and color
plane registration.
System setup menu
The System setup menu allows you to make changes to general printer configuration default
settings such as PowerSave Time, printer personality (language), and jam recovery.
Table 7-43. System setup submenu
Menu item Values Description
JOB STORAGE LIMIT 1-100 Sets the limit for the maximum
number of jobs stored on the
hard disk at the printer.
Table 7-42. Print quality submenu (continued)
ENWW Control panel troubleshooting 377
To Next Page
Loading...