Menu item Values Description
POWERSAVE TIME Settings depend on the printer
model.
Reduces power consumption
when the printer has been
inactive for an extended period.
PERSONALITY AUTO
PCL
PS
PDF (HP Color LaserJet 5550
models only)
MIME (HP Color LaserJet
5550 models only)
Sets the default personality to
automatic switching, PCL, or
PostScript emulation.
CLEARABLE WARNINGS ON
JOB
Sets whether a warning is
cleared on the control panel or
when another job is sent.
AUTO CONTINUE ON
OFF
Determines printer behavior
when the system generates an
auto continuable error.
SUPPLIES LOW CONTINUE
STOP
Sets low supplies reporting
options.
COLOR SUPPLY OUT
(HP Color LaserJet 5550
models only)
AUTO CONTINUE BLACK
STOP
Sets COLOR SUPPLY OUT
printer behavior. When a color
supply is empty and the printer
is set to AUTO CONTINUE
BLACK, the printer will
continue printing using the
black toner only for a maximum
of 500 pages.
JOB STORAGE LIMIT 1-100 Sets the limit for the maximum
number of jobs stored on the
hard disk at the printer.
JAM RECOVERY AUTO
ON
OFF
Sets whether the printer will
attempt to reprint pages after a
jam.
LANGUAGE A list of available languages
appears.
Sets the default language.
I/O menu
The I/O menu allows you to configure the printer’s I/O options.
Table 7-44. I/O submenu
Menu item Values Description
I/O TIMEOUT 5 - 300 Allows you to select the I/O
timeout in seconds.
Table 7-43. System setup submenu (continued)
ENWW Control panel troubleshooting 379
To Next Page
Loading...