Q1342-90910 Internal assemblies 39
Internal assemblies
Transfer roller
1 Remove the following assemblies:
z Toner cartridge and media tray. See “Toner cartridge” on page 15
through “Media tray” on page 16.
2 Use needle-nose pliers to gently squeeze the two small tabs on
the transfer roller.
3 Lift the transfer roller up, slide it to the right, and lift it out of the
printer.
CAUTION Skin oils can damage the transfer roller sponge. Do not touch the black
transfer roller sponge.
Figure 28. Remove the transfer roller
Hint Do not misplace the small grounding spring that is underneath the right
side of the transfer roller.
To Next Page
Loading...