Printer Status Lights Description
Continuable error
Go
Ready
Attention
In the continuable error state,
the Go light is on, the Ready
light is off, and the Attention
light is blinking. Press Go to
attempt to recover from the
error and continue printing. If
the printer recovers from the
error, it will move to the
Processing data state and
complete the job. If the recovery
fails, the device will return to the
continuable error state. This
state can be reached in the
following circumstances:
● Manual Feed
● Out of paper for the
specified tray
● General continuable error
● Memory overflow (error
20) / memory full. Note:
PCL only.
● Temporary engine error
(41.x errors)
● I/O error (22 error) / Buffer
flow error Note: Parallel
only.
● I/O data error (40 error)
(Bad Connection) Note:
Parallel only.
● Memory configuration error
● Personality/Job related
error
● Fuser high temperature
(50.011 error)
Note
The LJ1010 product series does
not have paper out sensors.
When the printer goes to a
continuable error state because
its out of paper, the user the will
need to reload paper and press
Go to continue. No secondary
error information is provided to
the user from the lights.
ENWW Control Panel Lights 89
To Next Page
Loading...