Printer Status Lights Description
Attention State
Go
Ready
Attention
In the Attention state, the
Attention light is blinking and
the Go and Ready lights are off.
This state can be reached in the
following circumstances:
● Paper tray is empty
● Door open
● Toner Cartridge Missing
● Paper jam/ Tray Misfeed
Pressing Go attempts to reset
after a jam is cleared or is
ignored in the other error cases.
It may be necessary to clear the
error manually and press Go or
close the top cover. If the error
still persists, the device will
return to the Attention state.
Note
The LJ1010 product series does
not have paper out sensors.
When the printer is in an
Attention state because the
paper tray is empty, the user
must reload paper and press
Go.
Fatal Error
Go
Ready
Attention
While in the fatal error state, all
three LED's are on
continuously. Pressing Go
displays the secondary error
information for the fatal error,
and releasing the button(s) will
cause the device to return to the
initial "fatal error" state. (See.)
Cleaning Page
Ready
Attention
Go
The cleaning page is activated
using the Toolbox application.
Button presses are ignored
during cleaning mode.
Sleep Mode
Go
Ready
Attention
From the customer's
perspective Sleep mode is the
same as Ready mode.
90 Chapter 6 Troubleshooting ENWW
To Next Page
Loading...