Issue Cause Solution
Print is misaligned on the page
(skewed pages).
The media is loaded incorrectly. Reload the media, and make
sure that the media guides are
not too tight or too loose against
the media stack.
The input tray is too full. Remove some of the sheets.
The main input tray can hold up
to 150 sheets of 20-lb.
(75 g/m
2
) bond weight paper
(or fewer pages of heavier
media, a stack no higher than
25 mm). The priority input tray
can hold up to ten sheets of 20-
lb. (75 g/m
2
) bond weight paper,
one sheet of heavier media, or
one envelope or card.
The media you are using does
not meet HP’s specifications
(for example, it is too moist or
too rough).
Make sure that the media meets
specifications detailed in the HP
LaserJet Printer Family Print
Media Guide.
100 Chapter 6 Troubleshooting ENWW
To Next Page
Loading...