Large amounts of toner are scattered around the characters.
Cause Solution
The media resistivity is too high. (This most often happens
when transparencies acquire a static charge.)
1 Use a different media. Make sure that the media meets the
specifications detailed in the
HP LaserJet Printer Family Print Media Guide.
2 Turn the stack of media over and put it back in the tray.
3 Use media (particularly transparencies) that is designed
for laser printers.
The printer is operating in humidity or temperature conditions
that are not within the recommended ranges (often, the
humidity is too low).
Move the product to a different location.
Vertical white stripes appear.
Cause Solution
The toner is low or poorly distributed in the print cartridge. Gently rock the print cartridge back and forth to redistribute the
toner (see the illustration on the print cartridge). Replace the
print cartridge.
The media you are using does not meet HP specifications (for
example, it is too moist or too rough).
Make sure that the media meets the specifications detailed in
the HP LaserJet Printer Family Print Media Guide.
Table 6-4 Solving print-quality problems (continued)
108 Chapter 6 Troubleshooting ENWW
To Next Page
Loading...