Calibrating the printer at the control panel
Use the following steps to calibrate the printer using the printer control panel.
1.
Use the
(Left arrow) or the
(Right arrow) button to select SYSTEM SETUP and then press
(Select).
2.
Use the
(Left arrow) or the (Right arrow) button to select PRINT QUALITY and then press
(Select). CALIBRATE COLOR will display on the control panel.
3.
Press
(Select).
4.
Use the
(Left arrow) or the (Right arrow) button to select CALIBRATE NOW and then
press (Select).
5.
Press
(Select) to start the calibration.
www.partshere.com Partshere Troubleshooting
To Previous Page
Loading...