C4170-90959
Evaluate the Test Pages
113
Evaluate the Test Pages
Status Log Messages
Use the Status Log primarily to diagnose and troubleshoot intermittent printer errors, or to
gain information about multiple error conditions that may occur simultaneously. Status Log
information prints automatically on the Self-Test/Configuration Page. See also
“Configuration Page Elements” (page 48), item 4, Status Log. The Status Log retains the
printer’s last 10 error messages.
Status Log messages are listed in “Control Panel LED Messages” (page 96), according to
their corresponding Error LED configuration. For a complete listing of Status Codes, please
refer to the
Software Technical Reference Documentation
(Part Number 5021-0377). The
complete PJL Status Code listing is contained in the appendix of the
Printer Job Language
Technical Reference
. Also refer to HP’s web site at www.hp.com.
NOTE: Status codes that are not listed are not relevant to the HP LaserJet 2100.
Verify Installed Options
Verify that the options which are installed in the printer are reflected in the Configuration
Page. If an installed device is not shown, reseat the device and print a new Configuration
Page.
To Next Page
Loading...