210 Chapter 7 Removal and Replacement C4170-90959
Motor Plate Removal
1 Remove the following assemblies:
• Remove the printer drive assembly. (See “Printer Drive Assembly Removal”
(page 207) for instructions.)
• Remove the main motor. (See “Main Motor Removal” (page 209)for instructions.)
2 Remove the four screws shown in figure 7-76
Figure 7-76 Removing the Motor Plate Screws
3 Press and hold the clip shown in figure 7-77, and then slide the motor plate out of the
plastic holder while holding the bushing down with the other hand.
Figure 7-77 Removing the Motor Plate
To Next Page
Loading...