C4170-90959
Environmental Product Stewardship Program
13
Environmental Product Stewardship Program
Protecting the Environment
Hewlett-Packard Company is committed to providing quality products in an environmentally
sound manner. This HP LaserJet printer has been designed with several attributes to
minimize impacts on our environment.
This HP LaserJet printer design reduces:
Energy Consumption
Energy usage drops to as little as 12 W (110V) and 14 W (220V) while in low-power
(PowerSave) mode. Not only does this save natural resources, but it also saves money
without affecting the high performance of this printer. This product qualifies for
E
NERGY
S
TAR
. E
NERGY
S
TAR
is a voluntary program established to encourage the
development of energy-efficient office products.
E
NERGY
S
TAR
is a U.S. registered service mark of the U.S. EPA. As an E
NERGY
S
TAR
partner, Hewlett-Packard Company has determined that this product meets E
NERGY
S
TAR
Guidelines for energy efficiency.
Toner Consumption
EconoMode uses significantly less toner, which might extend the working life of the toner
cartridge.
Paper Use
Depending on the type of software program in use, users can request for a number of pages
of their documents to be printed on one sheet of paper. This N-up printing practice and the
printer’s automatic/manual duplexing feature, which provides two-sided printing, can reduce
paper usage and the resulting demands on natural resources.
The design of this HP LaserJet printer facilitates the recycling of:
Plastics
Plastic housing parts have markings according to international standards that enhance the
ability to identify plastics for recycling purposes at the end of the printer’s life.
To Next Page
Loading...