26 Chapter 2 Operating Requirements C4170-90959
Site Requirements
Operating Environment
The electrical and environmental specifications listed in “Specifications” (page 5) must be
maintained to ensure the proper operation of this printer. Consider the following points
before installing the printer:
• Install in a well-ventilated, dust-free area.
• Install on a level, flat, and continuous surface which can support the printer’s weight.
Make sure all four printer feet are level. Do not install on carpet or other soft surfaces.
• Ensure adequate power supply circuitry. Electrical specifications are listed in
“Specifications” (page 5).
• Install where there is stable temperature and humidity, with no abrupt changes (away
from water sources, humidifiers, air conditioners, refrigerators, or other major
appliances). Environmental specifications are listed in “Specifications” (page 5).
• Install away from direct sunlight, areas with vibration, open flames, ultrasonic heaters,
ammonia fumes, or magnets and devices that emit a magnetic field. If the printer is
placed near a window, make sure the window has a curtain or blind to block any direct
sunlight.
• Maintain enough space around the printer for proper access and ventilation. See
“Printer Space Requirements” (page 27) for more information.
To Next Page
Loading...