HP LaserJet 2100 - Page 60

48 Chapter 3 Printer Configuration C4170-90959
Printing Self-Test/Configuration Page
The configuration page lists many of the current settings and properties of the printer. To
print the configuration page, press and release the G
O
and J
OB
C
ANCEL
buttons
simultaneously when the printer is ready. If an EIO card is installed, a JetDirect
Configuration Page also prints (see figure 3-4).
Configuration Page Elements
Figure 3-3 HP LaserJet 2100 Self-Test/Configuration Page
1 Printer Information lists the name, formatter number, serial number, firmware
datecode, page count, LocalTalk information (name, node ID, and network number),
PostScript Level 2 emulation wait timeout, and HP JetSend address.
2 Installed Personalities and Options lists the installed printer languages (PCL, PCLXL,
and PostScript Level 2 emulation) and the options installed in each of the three DIMM
slots and the EIO slot.
3 Memory lists total memory, available memory, I/O buffering information, and resource
saving information.
4 Status Log lists the PJL status code and the corresponding page count. (The status log
only appears when errors have been registered.)
5 Settings lists settings for copies, paper, wide A4, courier, orientation, form, manual
feed, Resolution Enhancement technology (REt), resolution, personality, I/O timeout,
reprint, font (source, number, pitch, symbol set, and line term), PostScript Level 2
emulation error reporting, tray (multipurpose tray designation, tray locking, auto
continue, density, and tray mode), and I/O buffer.