HP LaserJet 2100 - Page 75

C4170-90959 Cleaning the Printer 63
Toner Cartridge Cleaning
This process cleans the photosensitive drum inside the toner cartridge. Use this process if
blurred, faded or smeared printouts occur. This process takes about 10 minutes.
Figure 4-2 Print Sample for Toner Cartridge Cleaning
NOTE: Make sure the toner cartridge is not empty when using this process. This process consumes
toner and if used often can reduce toner cartridge life. A nearly empty toner cartridge might
also cause print defects.
To Start Toner Cartridge Cleaning
1 Make sure the printer is turned on and in the ready state.
2 Press and hold the G
O
and J
OB
C
ANCEL
buttons until all lights flash. This will take about
10 seconds. Release the buttons when the lights flash.
3 Press the J
OB
C
ANCEL
button.
To stop the toner cartridge cleaning process, turn the printer off.