Duplexing-pendulum assembly
NOTE The duplexing-pendulum assembly is part of the paper-path switching mechanism
when the duplexer is installed.
1 Remove the following assemblies:
● Rear accessory cover. See
Accessory covers and the tray 2 extension door.
● Top cover. See
Top cover.
● Formatter assembly. See
Formatter assembly .
● Output-delivery assembly. See
Output-delivery assembly .
2 Remove two screws (callout 1).
1
Figure 6-41 Duplexing pendulum assembly (1 of 2)
Main assemblies 217
To Next Page
Loading...