3 Lift the door straight up and off of the door hinge pins.
3
Figure 6-119 1,500-sheet feeder door (3 of 3)
NOTE The door hinge pins are not captive when the door is removed. If the feeder must
be turned on its side or placed upside down, remove the hinge pins and the door spring
(callout 2). Place the pins and the spring where you will not lose them.
1,500-sheet feeder rear cover
1 Locate the upper rear-cover locking tabs (callout 1) on each side of the rear cover. Use a flat-
blade screwdriver to release these tabs.
2
1
Figure 6-120 1,500-sheet feeder rear cover (1 of 2)
Accessories 291
To Next Page
Loading...