Item Values Explanation
■ DUPLEX
■ *OFF
■ ON
Determine whether or not the paper
goes through the duplexer during the
paper path test. This item is available
only if the duplexer is installed.
■ COPIES
■ *1
■ 10
■ 50
■ 100
■ 500
Set how many sheets of paper are
used from each tray during the paper-
path test. If you are testing the stapling
function of the optional stapler/stacker
(DESTINATION item OPTIONAL BIN
1), you must select 10 copies.
Table 7-4 Diagnostics menu (continued)
322 7 Troubleshooting
To Next Page
Loading...