Control panel message Description Recommended action
21 PAGE TOO COMPLEX
For help press
alternates with
21 PAGE TOO COMPLEX
To continue press
The printer cannot process the page quickly
enough.
1
Press
( S
ELECT
button) to process
the page.
NOTE A loss of data will
occur.
2 Make the page contents less complex
and re-send the print job.
22 EIO X
BUFFER OVERFLOW
To continue press
The printer's EIO card in slot X has
overflowed its I/O buffer during a busy state.
1
Press
( S
ELECT
button) to resume
printing.
NOTE A loss of data will
occur.
2 Check the configuration of the EIO card
and the host computer.
3 If this error message persists, replace
the EIO card.
22 PARALLEL I/O
BUFFER OVERFLOW
For help press
alternates with
22 PARALLEL I/O
BUFFER OVERFLOW
To continue press
The parallel buffer has overflowed during a
busy state.
1
Press
( S
ELECT
button) to resume
printing.
NOTE A loss of data will
occur.
2 Check the parallel I/O configuration.
Set HIGH SPEED to NO and
ADVANCED FUNCTIONS to OFF.
3 Replace the formatter PCA. See
Formatter assembly .
40 EIO X BAD
TRANSMISSION
To continue press
A connection with the card in EIO slot X
has been broken abnormally.
1
Press
( S
ELECT
button) to resume
printing.
NOTE A loss of data will
occur.
2 Check that all of the cables are
connected to the EIO ports and that the
EIO board is seated properly.
3 If possible, print to another network
printer to verify that the network is
working properly.
4 Check the configuration of the EIO card.
5 If this error message persists, replace
the EIO card.
Table 7-7 Numerical printer messages (continued)
354 7 Troubleshooting
To Next Page
Loading...