Table 1-29 Optional stacker or stapler/stacker supported sizes and weights
Size
Dimensions
1
Weight
Capacity
2
Stacker or stacker part of stapler/stacker only
Letter
216 x 279 mm
(8.5 x 11 inches)
60 to 120 g/m
2
(16 to 32 lb) 500 sheets of 75 g/m
2
(20 lb) paper
A4 210 x 297 mm
(8.3 x 11.7 inches)
Executive 184 x 267 mm
(7.3 x 10.5 inches)
Legal 216 x 356 mm
(8.5 x 14 inches)
B5 (JIS) 182 x 257 mm
(7.2 x 10.1 inches)
A5 148 x 210 mm
(5.8 x 8.3 inches)
Custom
Minimum: 148 x 210 mm
(5.8 x 8.3 inches)
Maximum: 216 x 356 mm
(8.5 x 14 inches)
NOTE For additional information about using
custom media refer to the note available in
General
guidelines.
Stapler part of stapler/stacker only
3
Letter 216 x 279 mm
(8.5 x 11 inches)
60 to 120 g/m
2
(16 to 32 lb) 15 sheets of 75 g/m
2
(20 lb)
paper
A4 210 x 297 mm
(8.3 x 11.7 inches)
Legal 216 x 356 mm
(8.5 x 14 inches)
1
The printer supports a wide range of sizes. Check the printer software for supported sizes.
2
Capacity can vary depending on the paper weight and thickness, as well as the environmental conditions.
3
All sizes can be stacked, but only letter, legal, and A4 can be stapled.
Media specifications 29
To Next Page
Loading...