Step 3: Loading Paper into
the Printer
Before loading paper into the printer, you
will want to raise the paper supports
located behind the Paper Input Bin and
the Paper Output Bin. Using paper
supports can help prevent unwanted
paper curl and paper jams. These
supports can be extended for different
lengths of paper.
1 Raise the paper support on the Paper
Input Bin until it snaps into place.
2 Insert up to 100 sheets of paper into
the Paper Input Bin. Be careful not to
overfill the bin.
3 Center the paper using the paper
guides on the Paper Input Bin.
4 Raise the paper support on the Paper
Output Bin until it snaps into place.
Note
When adding paper to an existing stack in
the Paper Input Bin, always remove and
realign all paper to avoid multiple paper
feeds or paper jams or both.
1-8 Set Up EN
To Next Page
Loading...