4. On the left side, remove the (2) screws that attach the
grounding strap to the Gear Train Assembly (see callout 1 in
Figure 6-36 of the Combined Service Manual). Turn the
assembly upside-down before proceeding with further steps.
5. Remove the (5) self-tapping screws and the (1) machine screw
with star washer from the bottom of the DC Controller
Assembly. (See callouts 2 and 3 in Figure 6-36 in the Combined
Service Manual.)
6. Lift the DC Controller Assembly away from the printer frame.
Figure 25 Grounding Spring screw location.
HP LaserJet 5P Printer Service Supplement
Removal and Replacement
52
To Next Page
Loading...