If your computer is running a 64-bit Windows operating system, you must install the corresponding 64-
bit print driver. 64-bit print drivers are included on the software CD-ROM. Use the following steps to
install a print driver by using the Add Printer feature.
1. Insert the CD in the CD-ROM drive.
2. Click Start on the desktop, click Settings, click Printers and Faxes, and then click Add a
printer. The Add a printer wizard screen appears.
3. Use the Add a printer wizard to find and connect to the product. The print drivers are loaded as a
part of this process.
4. Select the Have disk option and navigate to one of the following files on the software CD:
To install the HP Traditional host-based driver, select \<language>\Drivers\Win98_ME\(your
language)\hpp3600x.inf
To install the HP JetReady 4.2 host-based driver, select \<language>\Drivers
\Win32_2000_XP_S2003\hpc3600e.inf
5. Complete the wizard steps. The print driver will be installed as part of the wizard process.
Installer Customization Wizard for Windows
Administrators can use the Installer Customization Wizard option to customize the
HP Color LaserJet 3600 installer by pre-setting the installation options in a response file. To start the
utility, click installer customization wizard on the main menu of the software CD browser. Using this
option, administrators can create a silent (unattended) installer that is customized with any of the
following selections:
●
Language
●
Operating system
●
Print drivers
●
Components
Running the Installer Customization Wizard
The Installer Customization Wizard runs from the CD. It can be started from the CD browser, depending
on product-specific instantiation. It runs separately from MSI with its own interface.
Running the Installer Customization Wizard produces one installation package and a response file
(RESPONSE.INI) for a single system installation. The installation package might work for multiple
systems that have the same response information, or the RESPONSE.INI file can be edited for system
configuration differences directly in the RESPONSE.INI file. The Installer HP Device Installer
Customization Wizard, available on the printing-system software CD in the Manuals\<language> folder,
provides the exact text for replacing entries in the RESPONSE.INI file.
To run the Installer Customization Wizard
1. Insert the HP Color LaserJet 3600 software CD in the CD-ROM drive.
2. In the CD browser main screen, click Installer Customization Wizard.
ENWW Installation instructions 185
Installation in Windows
To Next Page
Loading...