If the drop-down menu contains And the button says Then this happens when the Close
button is clicked
The current media size remains the
same as it was when the Custom button
was clicked.
Source Is
The Source is: setting specifies the source tray to use for printing a document. The list of source trays
depends on the printer accessories. Any optional source trays that are installed through the Device
Settings tab also appear here.
The Source is: drop-down menu can contain the following options, depending on what has been
installed on the product:
●
Automatically select
●
Manual Feed in Tray 1
●
Tray 1 (100-sheet multipurpose tray)
●
Tray 2 (250-sheet tray)
●
Tray 3 (500-sheet tray)
The default setting is Automatically Select. When this setting is selected, the HP Color LaserJet 3600
uses the source tray that supports the media size that you have selected. If you select a source tray
other than Automatically select, make sure that the correct media size is loaded in the source tray.
For more information about media sources, see the
Media attributes section of this STR.
Type is
The Type is: drop-down menu shows all of the media types that the HP Color LaserJet 3600 supports.
When you use the default setting, Unspecified, the printer uses the default media type, which is usually
Plain.
The following standard types appear in the list:
●
Unspecified
●
Plain
●
Preprinted
●
Letterhead
●
Transparency
●
Prepunched
●
Labels
●
Bond
●
Recycled
●
Color
Table 3-4 Close dialog box text strings (continued)
ENWW Paper/Quality tab features 79
HP Traditional host-
based driver for Windows
To Next Page
Loading...