●
Light 60-75 g/m
2
●
Envelope
●
Heavy Glossy 120-160 g/m
2
●
Heavy 105–120 g/m
2
●
Cardstock 164–220 g/m
2
●
Glossy 106-120 g/m
2
●
Tough Paper
The default setting is Plain, and the program selects the media type. If you select a different setting,
make sure that the correct media type is loaded in the tray that you selected in the Source is: setting.
When you change the print-driver setting to a media type that is not currently loaded in the product, a
control-panel message appears that prompts you to load the media type or choose another tray.
For more information about media types, see the
Media attributes section of this STR.
Use Different Paper For
You can print books that are comprised of different media types using the Use different paper for:
options.
When you select the Use different paper for: check box, the following settings can appear in the group
box, along with associated options:
●
First Page
●
Other Pages
NOTE You must use the same size of media for the entire print job. All Use different paper
for: options use the size that you selected in the First Page settings and the Size is: driver setting
becomes unavailable for all of the other Use different paper for: options. Therefore, the First
Page settings are described first in the following sections.
When you change the type and source of the media and covers, the settings you select remain
configured until you close the software program.
Each option for the Use different paper for: setting is described in the following sections.
First Page
Use the First Page option to select an alternative media size, type, or source for the first page of a
document. The following figure shows the appearance of the Paper Options group box when you select
the Use different paper for: check box. The First Page setting is selected by default.
80 Chapter 3 HP Traditional host-based driver for Windows ENWW
HP Traditional host-
based driver for Windows
To Next Page
Loading...