Verifying Installation and Providing Access
■ Verify that the HP Web Jetadmin software is correctly installed by navigating to it with your
browser as shown in the following example:
http://systemname.domain:port/
where systemname.domain is the host name of your Web server and port is the port number
assigned during installation. By default, the port number is 8000.
■ Provide users access to HP Web Jetadmin software by adding a link to your Web server's home
page that is addressed to HP Web Jetadmin's URL. For example:
http://systemname.domain:port/
Configuring and Modifying a Device
Using your browser, navigate to HP Web Jetadmin's URL. For example:
http://systemname.domain:port/
NOTE In place of systemname.domain, the IP address of the host computer on which HP
Web Jetadmin is installed can be used.
Follow the instructions on the appropriate home page to find and configure or modify your printer.
Removing HP Web Jetadmin Software
To remove HP Web Jetadmin software from your Web server, use the uninstall program provided
with the software package.
8 Chapter 2 HP Software Solutions Summary ENWW
To Next Page
Loading...