HP Laserjet,Color Laserjet 3800 - Page 213

Mopier Mode
The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated
copies from a single print job. Multiple-original printing (mopying) increases performance and reduces
network traffic by transmitting the job to the product once, and then storing it in memory. The remainder
of the copies are printed at the fastest speed. All documents that are printed in mopier mode can be
created, controlled, managed, and finished from the computer, which eliminates the extra step of using
a photocopier.
The HP Color LaserJet 3800 printer supports the transmit-once mopying feature when the Mopier
Mode: setting on the Device Options tab is Enabled.
Printer Hard Disk
When this option is enabled, the Job Storage option and the Mopier Mode option are enabled in the
print driver. Use the Job Storage option to store print jobs and then print them later from the control
panel. The multiple-original print (mopy) function is an HP-designed feature that produces multiple,
collated copies from a single print job.
Job storage
When the job-storage feature is enabled, the product can store print jobs so that you can gain access
to those print jobs later at the control panel.
VMOption. This option shows the amount of virtual memory (RAM) in the product.
The following options are available:
●
64 MB (default)
●
96 MB
●
128 MB
●
160 MB
●
192 MB
●
256 MB
●
288 MB
●
320 MB
●
384 MB
●
512 MB
Restore Defaults
Click Restore Defaults to reset the values on the Device Options tab to their original values.
PostScript tab features
To gain access to the PostScript tab, follow these steps:
1. Click Start.
2. Select Settings.
ENWW HP Traditional Postscript 3 Emulation Driver features 189
HP traditional print
drivers for Windows