The default setting is Auto Select. When this is selected, the device uses the source tray that supports
the selected media size. If you select a source tray other than Auto Select, make sure that the correct
media size is loaded in the source tray.
Paper type:
The Paper type: drop-down menu shows all the paper types that the HP LaserJet P1000 and P1500
Series printers support. The default setting is Plain Paper. If you select a different setting, make sure
that the correct media type is loaded in the tray selected in the Paper source: setting.
The following standard paper types appear in the list.
Table 4-1 Standard paper types and engine speed
Paper type Engine speed
Unspecified Full – 1:1
Plain
Full – 1:1
HP Multipurpose Paper Full – 1:1
HP Office Paper Full – 1:1
HP All-in-One Printing Paper Full – 1:1
HP LaserJet Paper Full – 1:1
HP Premium Choice LaserJet Paper Full – 1:1
Preprinted Full – 1:1
Letterhead Full – 1:1
Transparency Half – 1:2
Prepunched Full – 1:1
Labels Half – 1:2
Bond Half – 1:2
Recycled Full – 1:1
Color Full – 1:1
Light < 75 g/m
2
Full – 1:1
Heavy (90 to 105 g/m
2
)
Half – 1:2
Cardstock (105 to 176 g/m
2
)
Half – 1:2
Envelope Half – 1:2
Rough Half – 1:2
Vellum Full – 1:1
Archive Half – 1:2
1
Throughput for continuous printing might be reduced as a result of fuser heating limitations.
ENWW Driver tabs 83
To Next Page
Loading...