Use Different Papers/Covers
The Use Different Paper/Covers option allows you to print books that include different media types.
Use these options to include a blank or preprinted front cover or back cover on a document, or to select
an alternative media tray or type for the first page, other pages, or last page of a document. The following
illustration shows the appearance of the Paper Options group box when the Use Different Paper/
Covers check box is selected.
NOTE: Use the same size of media for the entire print job. All options selected from the available Use
Different Paper/Covers options use the size selected in the Size is: drop down menu.
Figure 4-6 Use Different Paper/Covers options
To enable Use Different Paper/Covers:
1. Check Use Different Paper/Covers.
NOTE: To print aFront Cover or Back Cover, the Add a Blank or Preprinted Cover option also
must be checked.
2. Select the appropriate option (Front Cover, First Page, Other Pages, Last Page, or Back
Cover) in the dialog box.
NOTE: The Back Cover options are not available when the Booklet Layout setting is enabled
on the Finishing tab. For two-page-per-sheet (2-up) booklet printing, include a cover by selecting
different media for the first page only. The back cover setting is unavailable, because this page
would be printed in the middle of a booklet.
3. Select the appropriate tray and type of media from the Source is: andType is: drop-down menus.
4. Click OK.
NOTE: When you change the type and source of the paper and covers, the settings remain configured
until you close the software program.
84 Chapter 4 Host-based driver for Windows ENWW
To Next Page
Loading...