Print Quality
The Print Quality group box contains the Print Quality drop-down box and the EconoMode check
box.
The Print Quality drop-down box controls the resolution, which refers to the number of dots per inch
(dpi) used to print the page. As resolution is increased, the quality (clarity and visual appeal) of print on
the page is improved. However, higher resolution might also result in longer printing times. The following
Print Quality options are available in the drop-down box:
●
HP LaserJet P1000 Series: FastRes 1200 and FastRes 600
●
HP LaserJet P1500 Series: FastRes 1200 and 600 dpi
The default setting for the Print Quality drop-down box is FastRes 600 for the HP LaserJet P1000
Series and 600 dpi for the HP LaserJet P1500 Series.
Select the EconoMode check box in conjunction with any of the print quality settings. When using
EconoMode, the device uses less toner on each page. Using this option might extend the life of the print
cartridge and can lower the cost per page, but also reduces print quality. Using the EconoMode feature
with non-HP print cartridges can result in toner spillage or device damage.
ENWW Driver tabs 85
To Next Page
Loading...