HP LaserJet P2010 Series PCL – Printing
How do I Steps to perform
1 Access the printer driver.
Click on File, Print in your application, and choose
Properties.
2 Use a printing shortcut
Click on the Printing Shortcuts tab. Select one of the
defined shortcuts or custom printing shortcuts, and then
click OK to print the job with the specific printer-driver
settings.
3 Create a custom printing shortcut Select one of the defined shortcuts as a base. Select the
appropriate print settings on the Printing Shortcuts tab,
or by using the settings on any of the Printing
Preferences tabs. Click Save As, type a name for the
custom printing shortcut, and then click OK.
4 Get help for any printing option.
Click the question mark (4a), then click on a print
control to display a pop-up help message for that control
or click Help (4b) for on-line help.
How do I Steps to perform
5 Select a page size.
Click on the Paper/Quality tab, and then click the Paper
size drop-down menu, then select a paper size. Click
Custom if the paper size you want is not in the menu.
6 Select a paper source.
Click the Paper Source drop-down menu, then select a
paper tray. Use Manual Feed for printing special media
such as transparencies, labels, or envelopes.
7 Select a paper type.
Click the Paper Type drop-down menu, then select a
paper type.
8 Select special pages
Select an option in the Special pages list box, and then
click Settings. Use the Settings dialog box to control the
settings for the special pages of the print job.
9 Print using Economode (to save
toner).
Click Economode.
2
3
1
4b
4a
6
8
9
7
5
1
©2007 Copyright Hewlett-Packard
www.hp.com
Development Company, L.P.
To Next Page
Need help?
General
