NOTE: This method can only be used if the printer is using a network connection.
1. On the printer, press and hold in the green button for eight seconds, or until you see the LEDs
above the button start to blink. The printer prints out the configuration pages.
2. On the first configuration page, under Product Settings, find the IP Address. Type this address
into a web browser such as Safari. The Device Status screen appears.
●
Using the HP Device Configuration application:
1. In the Applications folder, open the HP EWS Device Configuration folder. Run the HP Device
Configuration application.
2. Select the HP LaserJet P2010 Series printer from the list of devices. The web browser opens and
the Device Status screen appears.
Figure 5-15 Device Status screen
The following sections describe the screens and features that are available in the HP EWS.
Status
Use the Status tab to access and print detailed information regarding device and supply status, device
configuration, network configuration, and usage.
The Status tab contains the following pages:
●
Device Status
●
Device Configuration
●
Supplies Status
●
Network Summary
Device Status
The Device Status page shows device status messages. The Device Status page also shows some
pertinent device information and device settings.
ENWW HP Embedded Web Server (EWS, network-ready models only) 119
Macintosh
To Next Page
Loading...
