HP Embedded Web Server (network-ready models only)
The HP Embedded Web Server (HP EWS) is a Web-based application that allows users to control
settings on the HP LaserJet P2010 Series printer through a Web browser. To open the HP EWS, connect
the device to the network, open a Web browser, and type the IP address for the device in the address
bar.
NOTE: If the HP LaserJet P2010 Series printer is connected to the computer through the USB port or
the parallel port, you do not have access to the HP EWS.
The following tabs are available in the HP EWS:
●
Status
●
Settings
●
Networking
Status
Use the Status tab to access and print detailed information regarding device and supply status, device
configuration, network configuration, and usage.
The Status tab contains the following pages:
●
Device Status
●
Device Configuration
●
Supplies Status
●
Network Summary
ENWW HP Embedded Web Server (network-ready models only) 23
Software description