Installation overview
The software for the HP LaserJet P2010 Series printer comes in-box on one CD. On Windows systems,
the Setup wizard installs the HP LaserJet P2010 Series printing-system software from the CD onto the
hard disk and updates the Windows files.
The Setup wizard is not supported for MS Windows 98 SE, MS Windows Me, or MS Windows NT 4.0.
A Plug-and-Play or Add Printer wizard installation must be used for these operating systems. For more
information, see
Install the print drivers by using Microsoft Windows Plug-and-Play or the Add Printer
wizard on page 38.
Each installation option presents a series of dialog boxes that guides the installation process. The dialog
boxes presented depend on whether the device is directly connected or is networked.
NOTE: The HP LaserJet P2010 Series printing-system software uses MS USB printing support
(USBOOX), not DOT4 printing support.
36 Chapter 3 Install Windows printing-system components ENWW
To Next Page
Loading...
