NOTE: You must have administrator privileges to install the software.
1. Quit all open programs.
2. Insert the HP LaserJet P2010 Series printing-system software CD into the CD-ROM drive.
NOTE: If the CD does not start automatically, click Start, click Run, and then browse to and
double-click the SETUP.EXE file in the root directory of the CD.
3. Follow the on-screen prompts to install the software.
4. When the Installer software prompts you to select how the device will be connected, select Connect
via the Network, and then click Next. Follow the instructions on the screen.
5. If you are prompted to restart the computer, click Yes.
Install the print drivers by using Microsoft Windows Plug-and-Play or the
Add Printer wizard
The HP LaserJet P2010 Series printing-system software installer does not support Microsoft Windows
98 SE, Microsoft Windows Me, or Windows NT 4.0 (parallel-port connection only). To install the print
drivers on computers running any of these operating systems, use a Plug-and-Play installation for direct
USB printer connections, or an Add Printer wizard installation for network-connected printers.
During a Plug-and-Play or Add Printer wizard installation, the following drivers are installed:
●
Print driver
●
USB driver (for Plug-and-Play installations only)
●
EWS null driver (for the HP Embedded Web Server)
If the computer is running Windows 98 SE or Windows Me and you have a network-ready printer model,
configure the driver to include the advanced features of these printer models after the HP LaserJet
P2010 Series printing-system software is installed. Follow these steps to configure the driver:
1. Click Start, click Settings, and then click Printers.
2. Right-click the printer icon for the HP LaserJet P2010 Series printer, and then click Properties.
3. On the Configure tab, click the drop-down menu, select the printer model, and then click OK.
Plug-and-Play installation for direct USB connection in Microsoft Windows 98 SE
Up to five events might occur when you use Microsoft Windows Plug-and-Play to install the HP LaserJet
P2010 Series print driver software on a computer running Microsoft Windows 98 SE.
NOTE: The SETUP.EXE program on the HP LaserJet P2010 Series printing-system CD is not
supported in Windows 98 SE or Windows Me. For these operating systems, use Microsoft Plug-and-
Play for direct USB connections or the Add Printer wizard installation for network connections to install
the print drivers. If you run SETUP.EXE in these operating systems, an error message appears: The
operating system on this computer is not supported.
Follow these steps to install the HP LaserJet P2010 Series printing-system software on a computer
running Microsoft Windows 98 SE:
1. Verify that the HP LaserJet P2010 Series printer is turned on.
2. Quit all open programs.
38 Chapter 3 Install Windows printing-system components ENWW
To Next Page
Loading...
