29
Legend:
1) Hammer Tip
Figure 5. Cleaning the Hammer Tips
9. Install the hammer bank / ribbon mask cover assembly (page 139).
10. Install the shuttle frame assembly (page 177).
11. Install the shuttle cover assembly (page 141).
12. Clean the card cage fan assembly, as described in the next section.
NOTE: LineJet 500Q hammer bank
is shown, but the procedure is the
same for all hammer banks.
1
The hammer bank contains a strong magnet. To prevent damage to the
hammer tips, do not let the hammer bank cover assembly snap into place
as the hammer bank magnet attracts it. Any impact of the cover against the
hammer bank can break hammer tips.
Caution
To Next Page
Loading...
