HP LASERJET ENTERPRISE 500 - Connect the product to a computer by using a USB cable and install the software (Mac)

30
Chapter 3 Cleaning the Card Cage Fan Assembly
Cleaning the Card Cage Fan Assembly
1. Cabinet Models: Remove the paper path (page 161).
Pedestal Models: Remove the top cover assembly (page 142).
2. Vacuum the card cage fan assembly and surrounding areas to remove
paper particles, dust, and lint. (See Figure 6.)
3. Cabinet Models: Install the paper path (page 161)
Pedestal Models: Install the top cover assembly (page 142).
4. Return the printer to normal operation (page 101).
Legend:
1) Card Cage Fan Assembly
Figure 6. Cleaning the Card Cage Fan Assembly
NOTE: Cabinet model shown.
Procedure is the same for
pedestal model.
1