●
Driver PCA. See
Driver PCA on page 184.
●
Main drive assembly. See
Main drive assembly on page 194.
Remove the fuser drive assembly
1. Remove one screw (callout 1), and then remove the bracket (callout 2).
Figure 1-286 Remove the fuser drive assembly (1 of 4)
1
2
2. Release one tab (callout 1), and then remove the guide (callout 2).
NOTE: Carefully feed the cable (callout 3) through the hole to remove the guide.
Figure 1-287 Remove the fuser drive assembly (2 of 4)
2
3
1
208 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...