HP LASERJET ENTERPRISE 700 COLOR MFP M775dn - Stapler;stacker operation assembly

HCI left tray lifter drive
Before proceeding, remove the following assemblies:
●
HCI left tray. See
HCI left tray on page 265.
●
HCI left cover. See
HCI left cover on page 266.
●
HCI rear cover. See
HCI rear cover on page 270.
Remove the HCI left tray lifter drive
Disconnect one connector (callout 1), remove three screws (callout 2), and then remove the left tray
lifter drive (callout 3).
Figure 1-376 Remove the HCI left tray lifter drive
2
1
3
ENWW
Input devices
279
DRAFT