Stapler/stacker feed guide assembly
Before proceeding, remove the following assemblies:
●
Stapler/stacker front right cover. See
Stapler/stacker front right cover on page 301.
●
Stapler/stacker rear cover. See
Stapler/stacker rear cover on page 299.
●
Stapler/stacker right door. See
Stapler/stacker right door on page 303.
Remove the stapler/stacker feed guide assembly
1. Release two shafts (callout 1), and then remove the right door lower guide assembly (callout 2).
Figure 1-416 Remove the stapler/stacker feed guide assembly (1 of 7)
2
1
ENWW
Output devices
311
To Next Page
Loading...