Intermediate transfer belt
CAUTION: Avoid touching the black plastic intermediate transfer belt (ITB). Skin oils on the belt
might cause print quality problems.
1. Open the right door, and then grasp the small handles on the ITB (callout 1).
Figure 1-6 Remove the ITB (1 of 3)
1
2. Pull the ITB out of the product until two large handles (callout 1) expand along the right and left
sides of the ITB.
Figure 1-7 Remove the ITB (2 of 3)
1
ENWW
Intermediate transfer belt
7
To Next Page
Loading...